Let’s get ready to remove dead zones from your homes

Breaking videos, slow internet, buffering, loadings are seriously very irritating and frustrating problems isn’t?

So Linksys RE6300 AC750 has come to solve our problems to let us enjoy our internet life.

Linksys RE6300 extenders proved to be fruitful in providing high-speed internet and more excellent connectivity. It helps in replacing dead zones with fun zones.

In this article, we will have a detailed discussion about everything of Linksys RE6300, reset, troubleshooting, firmware update, setup and many more but before discussing all this, let’s have a brief knowledge about Linksys RE6300 AC750.

Before Initiating with the article, I want to clear one thing that this article is not for any selling or marketing purpose instead it is just an informative article through which we only believe in providing useful information to you all.

So, let’s begin

Linksys RE6300 AC750 is a wifi range extender that can reach every corner of your home or workplace.

It can enable you to do any of your work without any hindrances. It has many advance features that attract customers more.

So let’s discuss the features and benefits of Linksys RE6300 AC750.

Features of Linksys RE6300 range extender

Linksys RE6300 AC750 BOOST Wi-Fi Range Extender
  • ELIMINATE DEAD ZONES AND BOOST WI-FI SPEED

It quickly expand our home wifi to let you enjoy the best streaming, smooth online gaming, and more. The Linksys re6300 extends the wifi range up to 6,500 square feet so that the connection can even reach outdoors.

ELIMINATE DEAD ZONES AND BOOST WI-FI UP TO 6,500 SQUARE FEET
  • ABILITY TO WORKS WITH ALL ROUTERS

This Linksys extender is compatible with all types of routers as well as including your current device or those received from Internet service providers.

WORKS WITH ALL Wi-Fi ROUTERS
  • EASY SETUP OPTIONS
  • Linksys re64300 is very easy to set up. You need to press the Push Button Connect feature to sync it to the Linksys router automatically.
    Now look for the optimal location for your Linksys range extender through Spot Finder Technology.

  • If the extender is placed too far from your existing router, then the extender might not expand the wifi signals. Spot Finder technology make sure that your extender is located in the right location.
EASY SETUP OPTIONS FOR OPTIMAL PLACEMENT
  • BOOST THE WI-FI CONNECTIVITY WITH DUAL BANDS FEATURE

So here is good news, you can stream movies, play online, and easily browse without any interruptions, thanks to the extender’s wireless dual bands and Beamforming feature.

  • POWERFUL CONNECTIVITY WITH GIGABIT ETHERNET PORT

You can easily connect a wired device such as a gaming console, Smart TV to your wifi network. Your Linksys extender’s Gigabit Ethernet port offers data and information transfer speeds ten times faster than the Fast Ethernet port.

So, these are some benefits and features of Linksys RE6300 that makes it more fruitful.

So, after having a brief knowledge about Linksys extender, let’s have a detailed discussion about resetting our Linksys extender to its factory default settings.

How to reset Linksys Extender RE6300 AC750?

10 seconds!! Yes, in just 10 seconds you can indeed reset your Linksys wireless extender. Sometimes it happens that the extender is disconnected so you can again reset it by following these few simple steps:

  1. Just move towards your range extender to make sure that it is correctly plugged into the wall.
  2. Just look for that extender, you will find reset button just next to the Auto-Configuration button.
  3. Press that reset button for at least 10 seconds.
  4. After 10 seconds release the button so that the extender should reset its factory settings.

So, by following these simple steps, you can very easily reset your Linksys RE6300.

Linksys RE6300 not working?

Sometimes, not only occasionally but many times, it happens that Linksys Extender does not work correctly. So to solve this problem we have bought many troubleshooting solutions, so just check it and again move in your colorful internet world.

  • Restart the router

To restart-

  1. You should unplug the router from the power socket and check the power supply, but with proper safety!!
  2. Try to remove all the cables from your router.
  3. Once you had done this then, again plug the router properly.
  • Renew the IP address –

Another solution when Linksys RE6300 not working, is to renew your router’s IP address.

We all have learned beforehand that our router receives the IP address from the IPS modem. When your Linksys Extender is not working then in that case, it’s better to renew its connection with the modem.

Then turn off your modem as well as routers. Wait for a while and then turn ON the IPS modem.

When the light blinks, turn on Linksys router and then after the break of around 1-minute turn on the computer.

We hope this method would have solved your problem, and if not, then there is one more way.

  • Try to reproduce your computer MAC address.

To clone the address, you need to follow these steps:

  1. Open your computer and then follow this step setup > Mac Address Clone.
  2. Now, log in browser-based utility.
  3. Next, click on the setup tab.
  4. Click on the Mac Address Clone page.
  5. Now click on Enabled.
  6. Then, either on Clone My PC’s Mac or enter a 12 digit MAC address on the old router.
  7. Finally, click on save settings.

Once you have completed all these steps, then at last finally reboot everything.

If this also didn’t prove to be helpful, then you are left with last but not least option.

  • Reset the range extender to the factory default setting

Reset Linksys RE6300 to its factory default settings is also a way to solve this severe problem.

And to reset it, you have to press the Reset button for at least half a minute when the powerof the router is blinking.

We have discussed resetting in detail above you can go through it.

And with this, you can place a full stop not only to the reset process but even to all your problems of Linksys extender not working.

So after discussing all the troubleshooting steps in detail to solve your problems, now let’s throw light on the power light description.

POWER LIGHT DETAILED DESCRIPTION

Blinking green

This light indicates-

  • Upgrading firmware
  • Resetting to factory default
  • It’s booting up

Solid green

This light indicates-

  • It’s ready to use

Solid orange

This light indicates-

  • Weak and lacking connection with the router

In that case, you should unplug the extender and take it closer to the router.

Blinking orange

This light indicates-

  • Either it is not connected to the router
  • Or any other type of error

Now let’s know about the customer’s reviews and ratings for our Linksys RE6300 AC750 that will be helpful for you in taking any crucial decision.

Linksys RE6300 review

 With ⭐⭐⭐⭐ Rating, this device has some pros and cons.

Let’s look to at Linksys RE6300 reviews:

Pros –

  •  Efficiently increased the strength
  • Very easy to setup
  • Spot Finder is quite beneficial
  • Great wireless coverage
  • Great positioning of antennas

Cons –

  • Sometimes have connectivity issues
  • suddenly signal drops out
  • Installation is not user friendly

So after looking at Linksys extender reviews let us begin our discussion on the very critical topic, Linksys re6300 ac750 setup.

      How to set up Linksys extender RE6300?

Linksys extender setup RE6300 is exceptionally very easy and quite simple with browser-based setup feature. You are not required to install any setup CD.

Before starting the procedure of setup, must ensure these  things:

  1. Strong wifi connectivity.
  • Username and Linksys RE6300 setup password.
  • Linksys RE6300 must be plugged in a power socket, must not start the setup process until it starts blinking orange light.

Now start following these steps for Linksys RE6300 setup -:

Let’s start

Step 1.

Connect the device to the wifi range extender using a mobile phone or computer system.

Step 2.

Now, open the browser and then enter 192.168.1.1 in the address bar.

Step 3.

Now, click on START setup.

Step 4

     By default, As a wireless range extender option will be selected.    Click on Next.

Step 5.

   Now select your wifi.

Step 6.

    Now, enter Linksys RE6300 setup password and then click on Next.

Step 7.

Once you are connected, you will configure an extended wireless network, the network which Linksys extender will be broadcasting. If you want to change the settings you can or you can leave the default as it, it depends upon you.

Then click Next.

Step 8.

Now, click Next if the Spot Finder shows that the location of your range extender as Just right.


This feature indicates the signal strength between your router and Linksys range extender. If the Spot Finder blinks Too far or Too close, then change the location of your router and directly return to Step 1.

Step 9.

Always take care of the securities.

Create an admin password for your Linksys RE6300 and then click on save, if you’re done.

Step 10.

Now, you will find the option to Register your product. To register your product, you will be required to enter your email address, once you’re done, click on Next.

                                  GOOD NEWS!!

                 Your Linksys RE6300 extender is set up.

So we hope that by following these simple steps you will set your Linksys extender.

But no! Or you face any issue with the same then you are requested to kindly look for Linksys re6300 manual because it contains all the information about the extender and capable enough to answer all your questions.

                                          GET SET GO!!

Using wifi protected setup on Linksys extender RE6300

So, there are two methods for quickly setting up a client with wifi Protected Setup (WPS). 

You may do it using the physical button that is located on the Linksys extender, or you may also log in to the web-based setup page and then choose one of the three options available for configuring wifi protected setup.
 
i. Wifi Protected Setup™ (WPS) button

ii. Web-based WPS button
 

aWifi Protected Setup™ button
b. Through the WPS PIN
c. Through the client’s PIN


NOTE:  
The WPS configures one device at a time. The device you have to connect through WPS must also support WPS. Look at your device’s documentation to verify.
i. Wifi Protected Setup™ (WPS) button

If your Linksys router has a Wifi Protected Setup™ button then press it then press the WPS User-added image  button that you will find at the side panel of your Linksys RE6300 range extender.
 
QUICK TIP:  If your extender has not been configured then press the WPS button to configure your Linksys range extender to pair with an existing router or access point successfully.

However, if your extender is already configured, press the WPS button to configure the extender to pair with wireless clients or any other device that supports wifi protected setup.

 

User-added image

 
ii. Web-based WPS button
 

a. Wifi Protected Setup™ button
 
First of all, log in to your range extender and then tap on the Wireless > WPS.  Then, locate and press the WPS button located on your device, to begin with, the WPS process.

User-added image

If the range extender’s setup page looks exactly like the image given below, then hit on WPS under Wireless instead, then tap on Enabled for WPS.
 

User-added image

b. Using the WPS PIN

Type the number in the second field in the extender’s web-based setup page, if your client device has a WPS PIN. Now, tap on the Register button.

User-added image

c. Through the router’s PIN
 
If the client asks for the Linksys router’s PIN, then type the number shown in the third field.

User-added image

 
Wifi Protected Setup™ Light Activity

  • The light blinks slowly for every two seconds for around two minutes when the wifi Protected Setup™ procedure is active. As the wifi Protected Setup™ procedure is successful, then the light continuously lit.
  • The light blinks sporadically for two minutes if it reads an error. Wait till the light stops flashing.

So now we hope that you will successfully perform WPS setup for your device.

 

Now, let’s discuss changing the Linksys RE6300 Range Extender’s Administrator Password.

 A login screen will pop up requesting for a password when you are accessing your RE6300 setup page.

Here, you will be required to type the Linksys re6300 default password. It is suggested to modify the Linksys default password for greater security.

This section will let you know about you about how to change your extender’s administrator password.

You will be required to follow some steps given below:

So let’s begin

  • Firstly, launch a web browser to log in to the web-based setup page re6300 successfully.
  • Type your extender’s admin password. If you have modified your Linksys password, type that instead. Or else, type your default Linksys password, then tap on Login.
  • Tap on the Management option, on the web-based setup page. Give your administrator password for your Linksys range extender in the Extender Password field and then re-enter it to the confirmation fields.
  • Lastly, tap on the Save button.

So, this is how by following some simple steps, you can change your administration password.

So, after learning about changing administrative Password, let us know about modifying the Extended Wireless Settings of Your Linksys RE6300 Extender.

So before moving with this, let us first understand what Linksys extended wireless settings is?

The Extended Wireless Settings of the RE6300 AC750 are the wireless links between your extender and the wireless clients.

It has some options that help you to configure the WiFi settings for your extended wireless network quickly.

So now, we will understand how to change the wireless settings of the extended wifi network:

Let’s start

  • Firstly, access the web-based setup page of your Linksys range extender.
  • Then, move to the Basic Settings section.
  • Here, look for the Extended Wireless Settings that you want to modify.
  • Type wifi name along with Password in the Network Name and Password fields, according to your choice.
  • If you want to change the Extended Wireless Advanced settings, you can do the same on this page.
  • The same steps are applied if you wish to modify the Extended Wireless Settings for your 5 GHz network.
  • Now, scroll down to the 5 GHz Extended Settings section and then repeat Steps 3-5.
  • Ensure to save the modifications that you have made.

You should have successfully modified the Extended Wireless Settings of the Linksys re6300 range extender.

How to setup my Linksys RE6300 AC750 range extender in Access Point mode

In this article we are going to discuss how to setup Linksys RE6300 AC750 WiFi range extender in access point mode.

As from the subject of the article, it is clearly understood that Linksys RE6300 AC750 WiFI range extender can be set up in both extender mode as well as access point mode.

This feature is also one among many other attractive features of Linksys RE6300 AC750 WiFi range extender.

We had already discussed about how to set up Linksys RE6300 AC750 WiFi range extender in range extender mode in our other article. So you can follow the article by clicking on How to Connect Linksys RE6300 AC750 Wifi Range Extender

But here let’s initiate our discussion on Linksys range extender setup in access point mode.

Before that let’s discuss little bit about access point mode.

What are Access points?

They are devices characterised to create a wireless local area network. That means in this case you will connect Linksys RE6300 range extender with your network router or switch with Ethernet cable.

That thing distinguish it from range extender mode, in which you just establish wireless link with your network router/switch and it starts sending WiFi signal coming from your router throughout the network.

As in case of Access points, connection between network router/switch is wired, thus there will be minimal losses.

Whereas in case of range extender mode, there exist wireless connection between your network router and Linksys RE6300 range extender. Thus there is chances of more signal losses then in access point mode.

Why to install Linksys RE6300 AC750 WiFi range extender in access point mode?

It wholly depend on your network demands that whether you will install Linksys range extender in access point mode or extender mode.

For instance, if you are installing Linksys range extender for your home network then you can go for range extender mode.

But if you are planning to install your extender for business network then you are always advised to install Linksys RE6300 WiFi range extender in access point mode.

Reason for the same is that while in range extender mode, your extender can support less number of connections that is not more than 20.

Whereas in case of access point, it can have 60 simultaneous connections.

So that makes a huge difference.

At the same time, although in range extender mode, your Linksys range extender can extend the network coverage, but it cannot extend the available bandwidth.

Thus if more number of devices get connected with your range extender, then bandwidth utility will end you up in slower network connection.

Whereas in access point, this is not the case.

This is the reason why access point is preferred choice in case of business networks.

Now after having brief introduction as well as advantages of access point mode, let’s initiate our discussion in how to set up Linksys RE6300 AC750 WiFi range extender in access point mode.

Before initiating the setup, there are some basic things that you have to ensure. These are:

  1. Your WiFi connection is working
  2. You should make Wi-FI name as well as Wi-Fi password handy.
  3. Ethernet cable, to establish connection between Linksys range extender and network router.

After that you can proceed with setup steps.


Step 1:
First step remain same both in case of setup of Linksys RE6300 range extender in extender mode and access point mode. This is powering on the device. You have to wait until LED starts blinking orange.

  Step 2:

Then establish connection between your Linksys RE6300 range extender and network router with the help of Ethernet cable. Then wait until light turns to be green.
 
Step 3:
Now connect your wireless device like computer, with Linksys  range extender network, which by default will be named as Linksys Extender Setup xxx.

Here xxx means last three characters of Linksys range extender’s MAC address. You can locate the same at the back label on your extender.

  Step 4:
Once you get connected with Linksys range extender network, next step is to launch web browser on that device.

Then type http://extender.linksys.com” in the Address bar of the browser.

  Step 5:
Once it gets opened up then click on  .

Step 6:
Then you will be asked in which mode you want to install your Linksys RE6300 range extender. Before proceeding further, ensure that you had established Ethernet connection between Linksys range extender and network router.

Then click on as a wired range extender (Access point) option and then click on Next.

linksys re6300 access point setup

Step 7:
Now you will be asked to create the extended network. This is the network which your access point will be broadcasting. After that click Next.

linksys re6300 extended network

Step 8:
Then you will be asked to create an admin password for the extender network. After entering the same click on Save

linksys re6300 admin password


Step 9:
In last step you will be asked to register your Linksys range extender. SO that updates can be sent to you.

For this enter your Email Address then click Next

If you want, you can also skip this step.

That’s it your Linksys RE6300 range extender is successfully set up in Access Point mode. You will receive a confirmation message on your screen.

linksys extender setup re6300


These were the various steps that you have to follow to setup Linksys RE6300 WiFi range extender in access point mode.

Hope all information provided in this article will prove fruitful to you and you will be able to complete Linksys range extender setup successfully.

But if any issue still persist then you are requested to kindly contact on Linksys’s official website for technical help.

How to Connect Linksys RE6300 AC750 Wifi Range Extender

In this article all your queries related to Linksys RE6300 AC750 WiFi range extender such as steps involved in setting up Linksys RE6300 or troubleshooting issue while connecting Linksys RE6300, will be discussed extensively.

But before discussing steps involved in Linksys RE6300 WiFi range extender setup, let’s have a brief introduction of what Linksys RE6300 AC750 WiFi range extender is.

Linksys RE6300 AC750 Wi-Fi range extender is well known for its operability in dual bands i.e. 2.4 GHz and 5GHz, as well as in dual modes i.e. both in access point mode and Range extender mode.

These two main features distinguish Linksys RE6300 AC750 WiFi range extender from other range extenders.

Although these two are not only features associated with Linksys RE6300 extender. Some other main features of Linksys range extender includes:

  • Compatibility to operate with 802.11 a/b/g/n devices.
  • Comes along with two external antennas. These help you to beam out your WiFi signal in any one particular direction.
  • Have one Fast Ethernet port, using which you can establish a wired connection between Linksys RE6300 range extender and a wired device.
  • Uses Cross-band technology, which helps in enhancing its performance in great way.
  • Support Browser-based setup.
  • Comes along with Wi-Fi Protected Setup(WPS) button.
  • It is capable to boost up WiFi range up t6500 sq. ft. Thus if it satisfy your network range then Linksys RE6300 range extender will be best choice for you.
  • Enabled with Spot-Finder technology. Thus will guide you up with the best place to place your Linksys RE6300 range extender.
  • As stated earlier also, it is capable to work as both access point as well as range extender.
  • And much more.

After having a look at features of Linksys RE6300 range extender, now let’s move toward our main discussion topic that is how to connect Linksys RE6300 WiFi range extender.

Steps to setup Linksys RE6300 range extender

As discussed above in the features of Linksys RE6300 AC750 WiFi range extender, it is enabled with browser-based setup feature. This feature adds great ease to users while installing Linksys RE6300 range extender.

To setup Linksys RE6300 range extender you do not need a setup CD.  All you have to do is to launch a browser based utility.

Steps involved in setting up Linksys RE6300 range extender are as given below:

Step 1:

Firstly, you will require a device through which you can use browser based utility to setup your Linksys RE6300 WiFi range extender.

Then connect this device(in this case we are taking it to be a computer)with Linksys range extender’s default network name i.e. Linksys Extender Setup-xxx. Where this xxx means last three characters of Linksys RE6300 extender’s MAC address. You can easily know about the same by checking out the label present at the back of the extender.

Note:- Before initiating a setup process for Linksys range extender, you are required to power on the extender device, by putting it on power.

Step 2:
Once link between your computer and Linksys range extender gets established, you are required to open up web browser on this very computer.

Then enter http://extender.linksys.com or 192.168.1.1in the Address bar of your web browser.

This will automatically take you to Linksys range extender setup page.
 
Step 3:
Here you have to click on  .

re6300 extender setup

Step 4:
Then you will be asked to select that whether you want to install your Linksys RE6300 range extender in range extender mode or access point mode.

In this case we are considering that you want to install it as range extender.

Thus you will be required to click on As a wireless range extender option

Then click on Next.

linksys re6300 access point setup

Step 5:
Now you will see list of available Wi-Fi networks. Among them select your Wi-Fi network.
 

list of available Wi-Fi networks re6300

Step 6:
Then you will be asked to enter the password of your WiFi network.

After entering the same click on Next.

Enter password of linksys re6300


Step 7:
Once connection with your WiFi network got established successfully, you will be landed to the page where you can configure the extended wireless network that means network which will be extended by using your Linksys range extender.

Here after making required changes click on .

linksys re6300 extended wireless network


Step 8:
Next will come Spot Finder technology. Using this technology, you will be known of the fact that whether your Linksys RE6300 range extender is placed at right place or not.

Here right place will mean that whether your extender is placed at the place where it is getting adequate signal strength from your network router/switch or not.

If Spot Finder says that Linksys RE6300 extender is placed at right location then just click on Next.

Otherwise you will be required to change the place of Linksys RE6300 range extender in the way asked by Spot Finder and start from Step 1.

linksys re6300 spot finder


Step 9:
It is always advised to create a good admin password, to secure your network from unwanted outer threats.

While assigning a password, you can take help of Password hint.

Once you are done with it click on 

linksys re6300 admin password


Step 10:
At the end of setting up Linksys RE6300 range extender, you will be asked to register your product. Here all you have to do is to enter your email id and click on.  
 

Linksys RE6300 extender register your product

At the end this page ensures that you have successfully completed Linksys RE6300 range extender setup in extender mode.

We hope all steps mentioned above in this article are clear and understandable. You can easily setup Linksys RE6300 AC750 WiFi range extender in extender mode using these steps.

If you want to setup Linksys RE6300 range extender in Access point mode then you can follow our above other article.

How to upgrade Linksys re6300 firmware

Firmware for your extenders are essential as they use to fix all the bugs in your device.

You can download the firmware for your device from the Linksys official website. It is mandatory to update the firmware to it’s latest version periodically.

So, here are the steps that will guide you about how to upgrade Linksys re6400 firmware.

Let’s start


 
Step 1:

Firstly, launch a web browser to log in to the web-based setup page of your Linksys re6300 range extender.

There are three (3) methods to log in to the web-based setup page.

  • Type “http://extender.linksys.com” in the Address field.
  • Type the range extender’s IP Address.​

NOTE:  Its default IP Address is 192.168.1.1.  Once your Linksys range extender is already configured, you will require to search the IP Address in the Linksys router’s DHCP table.  

Step 2:
Next, you will be asked for a Password.  If you have already modified your Password, enter the Linksys custom password. 

Or else, type the default “admin” in the Password field and then tap on Login.

Step 3:
On the web-based setup page, tap on Firmware update that is under administration.

Step 4:
 There are two methods in upgrading Linksys firmware.

  • Automatic Update

The extender will automatically detect the new available firmware.  If there is any version available, tap on the Update now button, to begin with, the process of upgrading your Linksys firmware.

User-added image

Choose the Auto-update range extender when improvements are available checkbox if you would like for future firmware files to update automatically.

  • Manual update
     

To begin with, manual update option, tap on Select a File and choose the firmware file that you have already downloaded, then tap on Open.  

NOTE:  Ensure that you have downloaded the firmware from the Linksys support product page.
 

Step 5:
Next, tap on Save.

User-added image


The progress for your upgrade procedure will appear on the same page. 

If you want to avoid any problems with your range extender, do not interrupt the firmware upgrade procedure
 

So, this is how you can smoothly perform the firmware update process for your Linksys wireless re6300 range extender.

So, hope that you will successfully upgrade the firmware for your unit by following the steps discussed above.

We have till now discussed almost every essential concepts of Linksys RE6300 except its specifications, so to know the same continue reading.

Linksys re6300 specs

Look at the Linksys re6300 specs that is very important to know before making any crucial decision.

Specifications

GENERAL

  • Form Factor

external

  • Height

2.4 in

  • Depth

4.8 in

  • Manufacturer

Cisco

MODEM

  • Antenna Qty

Two

NETWORKING

  • Type

Wifi extender

  • Connectivity Technology

wireless

  • Data Link Protocol

IEEE 802.11ac

  • Features

Cross-Band Technology, Spot Finder Technology, Wifii Setup (WPS), beamforming

  • Compliant Standards

IEEE 802.11ac

  • Wireless Protocol

802.11ac

  • Wifi network Bands

2.4 GHz, 5 GHz

  • Encryption Algorithm

WPA, WPA2, 128-bit AES

ANTENNA

  • Antenna

External integrated

  • Antenna Qty

Two

  • Antenna Form Factor

external integrated

MISCELLANEOUS

  • Encryption Algorithm

128-bit AES, WPA, WPA2

  • Refurbished

refurbished

  • Color

white

INTERFACE PROVIDED

  • Quantity

One

HEADER

  • Brand

Linksys

  • Product Line

Linksys

  • Model

RE6300

  • Packaged Quantity

One

  • Compatibility

PC

DIMENSIONS & WEIGHT

  • Width

3.4 in

  • Depth

4.8 in

  • Height

2.4 in

SERVICE & SUPPORT

  • Type

Ninety days warranty

SERVICE & SUPPORT DETAILS

  • Type

limited warranty period

  • Full Contract Period

Ninety days

So these are some Linksys re6300 Specs that you must take into consideration.

Hope that all the information provided in this article will prove fruitful for you and now you have all the details about Linksys RE6300 AC750.

But if any problem persists, then you are requested to contact Linksys official website because this is an informative article and we don’t provide any technical support through this.

                              All the very best!!

Linksys RE6300 FAQs

What are all items included in the Linksys RE6300 package?
 
The below-given items are included in the package:

  • Linksys RE6300 extender
  • Quick Guide

What are the different parts of RE6300?

The RE6300 parts:

  • Ports – One 10/100/1000 ethernet port
  • Lights – Power / WPS and ethernet port
  • Wifi Protected Setup button
  •  Factory Reset button
  • Two non-detachable Linksys antennas

What is the power rate of the RE6300?

The internal AC / power supply of the extender RE6300 is 100 – 240 V (0.5 A, 50 / 60 Hz).

What is the default IP address, as well as default password of the RE6300 extender?

The default IP address for the RE6300 is 192.168.1.1, and the default Linksys password is admin

What are the two Linksys extender re6300 setup modes?

The Linksys RE6300 can easily set up in two modes. Wired Access Point mode and Wireless Range Extender mode.

How does one identify that in which mode the Linksys RE6300 extender is in?
After successfully setting up, access the RE6300’s web-based setup page to know the updated top header name. 

IMPORTANT:  If the extender is in Access Point mode, then the top header will reflect Dual Band Wireless Access Point. The full title will read Dual Band Wireless Range Extender if the extender is on Range Extender mode,

What are the wireless security modes supported by Linksys RE6300?

The wireless security modes supported by Linksys extender is: Access Point mode usually supports WPA2™ Personal and WPA2/WPA™ Mixed Mode. and Range Extender mode usually supports WPA2 PersonalWPA2/WPA Mixed Mode and WEP.

IMPORTANT:WEP is now not supported by the Access Point mode as it is not at all safe and secure.  WEP is supported by the Range Extender mode to keep the coordination with the access point.

What is the default network name of the Linksys RE6300 extender?

The default network name for your Linksys RE6300 is Linksys Extender Setup – xxx.

Note-  xxx represents the last three digits of your Linksys re6300 range extender’s MAC address.